# This Question: 1 pt 3 of 3 (3 complete) This Quiz: 3 pts possible Gabrielle's Glassworks...

###### Question:

This Question: 1 pt 3 of 3 (3 complete) This Quiz: 3 pts possible Gabrielle's Glassworks makes glass flanges for scientific use. Materials cost $3 per flange, and the glass blowers are paid a wage rate of$22 per hour. A glass blower blows 10 flanges per hour. Fixed manufacturing costs for flanges are $22,000 per period. Period (nonmanufacturing) costs associated with flanges are$12,000 per period and are fixed. Read the requirements. Requirement 1. Select the graph that shows fixed, variable, and total manufacturing cost for flanges, using units (number of flanges) on the x-axis. (Enlarge each graph before selecting your answer.) OC. ОА. 100.0001 OB. 100,000+ OD. 100.0001 100,000 Variable costs Total costs O 08 Toyal costs Valable costs Cost Cost Cost Cost Cost Fixed costs Fixed costs Fixed costs Total costs Fixed costs Variable costs OTTIMAL Total costs 0- D.09.06.02 Doop.60.000 Number of flanges Variable costs OKTIT 2.09.06 02 Dop.60.000 Number of flanges 2.09.06 02 Dop.60.000 Number of flanges 5,09,06,02 ODOOD.000.000 Number of flanges Requirement 2. Assume Gabrielle's Glassworks manufactures and sells 4,000 flanges this period. Their competitor, Faina's Flasks, sells flanges for $9.80 each. Can Gabrielle sell below Faina's price and still make a profit on the flanges? (Round the total cost per unit to two decimal places.) Begin by determining the formula used to calculate the total cost per unit. ( Total fixed costs + Total variable costs ) / Units produced and sold v = Total cost per unit ; therefore, they sell below The total cost per unit when manufacturing 4,000 flanges is$ Faina's price and still make a profit Requirement 3. How would your answer to requirement 2 differ if Gabrielle's Glassworks made and sold 8,000 flanges this period? Why? What does this indicate about the use of unit cost in decision making? (Round the total cost per unit to two decimal places.) The total cost per unit when manufacturing 8,000 flanges would be $With production and sales at this level, the company V make a profit if the selling price is below$9.80 each. Managers must be cautious using unit costs for decision making because V remain the same regardless of the number of units produced. Choose from any list or enter any number in the input fields and then continue to the next question.

#### Similar Solved Questions

##### LUI JUI) em lést 2 / Test 2 When a corporation reacquired shares at less than...
LUI JUI) em lést 2 / Test 2 When a corporation reacquired shares at less than average cost per share? Select one: O a. Retained Earnings is never reversed O b. Retained Earnings is reversed c. The difference is sometimes recorded as credited to Contributed Surplus Account O d. The difference ...
##### Can some one help with part B) it is not correct, when all my other questions...
can some one help with part B) it is not correct, when all my other questions are... Entered Answer Preview Result B B correct 0.212 0.212 correct 0.661 0.661 incorrect B B correct At least one of the answers above is NOT correct. (1 point) The owner of a dry cleaning store believes that the mean a...
##### Please show work on how you have obtained the calculations. Required information [The following information applies...
Please show work on how you have obtained the calculations. Required information [The following information applies to the questions displayed below.] 0.58 points The following partially completed process cost summary describes the July production activities of the Molding department at Ashad Compa...
##### A Review | Constants | Periodic Table The value of Ksp for Mg3 (AsO4)2 is 2.1...
A Review | Constants | Periodic Table The value of Ksp for Mg3 (AsO4)2 is 2.1 x 10-20. The AsOX-ion is derived from the weak acid H3 AsO4 (pKal = 2.22; pKa2 = 6.98; pKa3 = 11.50). Part A Calculate the molar solubility of Mg3 (AsO4), in water. Express your answer to two significant figures and includ...
##### A rectangular water tank is divided by a partition into two chambers, as shown in Fig....
A rectangular water tank is divided by a partition into two chambers, as shown in Fig. 17-23a. In the bottom of the partition is a round, sharp-edged orifice with a diameter of 150 mm. The coefficient of discharge for the 4. is 0.62. At a certain instant, the water level in chamber B is 2.5 m higher...
##### A machine costing $216,200 with a four-year life and an estimated$19,000 salvage value is installed...
A machine costing $216,200 with a four-year life and an estimated$19,000 salvage value is installed in Luther Company's factory on January 1. The factory manager estimates the machine will produce 493,000 units of product during its life. It actually produces the following units: 122,600 in Yea...
##### Thats all i'm given would it be the Ka1 which js 1.8x10^-5 pH and Buffers IV....
thats all i'm given would it be the Ka1 which js 1.8x10^-5 pH and Buffers IV. pH of a Buffer Solution Mass of sodium acetate, CH,COONa, g 4.23g Calculated pH Measured pH buffer solution prepared with dissolved CH.COONa + 8.5 mL CH,COOH(aq) 13.84 40 ml buffer + 1.0 mL of 6.0 M HCl(aq) 1.30 40 ...
##### 02 +Vo D3 Rgare 18 Circuit for Problem 1 Analysis 1. Copy the circuit of Figure 1.8 and sketch the ow of pesitive curment throughout the entire circuit for o>0. Repeat for n ce 2....
02 +Vo D3 Rgare 18 Circuit for Problem 1 Analysis 1. Copy the circuit of Figure 1.8 and sketch the ow of pesitive curment throughout the entire circuit for o>0. Repeat for n ce 2. Plot two periods of nlt) and s) for each of the thee input wave shown in Figune 17 on page 37 fom output t (a) Feak v...
##### Given a steel railroad track which was installed at 30 F. Let E = 29 x...
Given a steel railroad track which was installed at 30 F. Let E = 29 x 10^6 psi and α = 6.5 x 10^-6 / F If the temperature reaches 125 F, a) Find the normal stress in the rails which are welded together to form a continuous track. b) Find the normal stress in the rails assuming the rails are 3...
##### Point charge A is 2 mC, and point charge B is 10 mC, distance between them...
Point charge A is 2 mC, and point charge B is 10 mC, distance between them is 1.0 m. The third charge C, of -5 mC is positioned between A and B so that electric force acting on is zero. We move charge C a little bit along the line connecting charges A and B. The force acting on charge C after we mov...
##### If 8n+22=70, what is 3n?
If 8n+22=70, what is 3n?...
##### A golf bag contains 6 white balls and 8 yellow balls
A golf bag contains 6 white balls and 8 yellow balls. What is the probability of each event?A) Drawing 3 white balls?B.) Drawing 1 Yellow ball and 1 white ball?Thanks...
##### Flexible Budgets and Variance Analysis Question 2 Shandy manufacturing produces cartons of beer sold internationally. The...
Flexible Budgets and Variance Analysis Question 2 Shandy manufacturing produces cartons of beer sold internationally. The company reveals the following budgetary information relating to its standard direct material and direct labour costs for a carton of beer in 2010: Direct materials: \$1.50 per kg....
##### Assume that the complete combustion of one mole of glucose to carbon dioxide and water liberates...
Assume that the complete combustion of one mole of glucose to carbon dioxide and water liberates 2870 kJ/mol (AG' = -2870 kJ/mol). If one contraction cycle in muscle requires 63 kJ, and the energy from the combustion of glucose is converted with an efficiency of 43% to contraction, how many cont...