# Fluid Mechanics & Fluid Power Determine the NPSH available. The pressure in the tank is - 20 kPa at 70

###### Question:

Fluid Mechanics & Fluid Power

Determine the NPSH available. The pressure in the tank is - 20 kPa at 70 °C (atmospheric pressure is 100.5 kPa). The water level in the tank is 2.5 above the pump inlet. The pipe is 1%", schedule 40 with a total length of 12 m. The elbow is standard, and the globe valve is fully open. The flow rate is 95 L/min. FIGURE 13.27 llustration of pump performance for different impeller diameters with net positive suction head required. Performance chart for a2x 3 10 centrifugal p at 3500 rpm. 20 2x3 I0 0 25 50 75 00125 150 175 200 225 250 275 300 325 350 37 Capacity (gal/min) 200 Capacity (L

#### Similar Solved Questions

##### 4) large oil company produces two grades of gasoline: regular and super-unleaded. To produce thes...
4) large oil company produces two grades of gasoline: regular and super-unleaded. To produce these gasolines, equipment is used which requires as input certain amounts of each of the 2 worth of a dollar's worth of super-unleaded requires inputs of $0.15 worth of regular, and$0.11 worth of super...
##### Please help im so lost i have been working on this for days Step 1 Journalize...
Please help im so lost i have been working on this for days Step 1 Journalize the July transactions. Use journal page 1. Step 2 Post the July transactions from page J1 to the general ledger. Step 3 Prepare a trial balance at July 31 using the running balance total for each account in the ledger. Ste...
##### How is the tax treatment of a dividend distribution different from stock redemption?
How is the tax treatment of a dividend distribution different from stock redemption?...
##### How do I find the derivative of  y=xsin^(-1)x + sqrt(1-x^2)?
How do I find the derivative of  y=xsin^(-1)x + sqrt(1-x^2)?...
##### How do you find the values of theta given sectheta=2?
How do you find the values of theta given sectheta=2?...
##### A good reason to allocate overhead using machine hours is because machines are less likely to...
A good reason to allocate overhead using machine hours is because machines are less likely to take breaks than humans? T or F...
##### A small company heats its building and will spend $9,156 in year 1 on natural gas... A small company heats its building and will spend$9,156 in year 1 on natural gas for this purpose. Cost increases of natural gas are expected to be 9% per year starting year 2. Their maintenance on the gas furnace is going to be $391.00 in the first year and this expense is expected to increase by ... 1 answer ##### Item1 1 points Item Skipped eBookPrintReferences Check my work Check My Work button is now enabledItem... Item1 1 points Item Skipped eBookPrintReferences Check my work Check My Work button is now enabledItem 1Item 1 1 points Item Skipped Magnolia Manufacturing makes wing components for large aircraft. Kevin Choi is the production manager, responsible for manufacturing, and Michelle Michaels is the mark... 1 answer ##### Part D and E please 2. Consider the information in Table 1. Table 1 Correlation with... Part D and E please 2. Consider the information in Table 1. Table 1 Correlation with market portfolio 0.20 0.80 1.00 0.00 Standard deviation Return Beta Stock 1 Stock 2 Market portfolio Risk-free asset 5% 12% 8% 0% 16% 2% 0 (a) Consider Table 1. Calculate betas for stock I and stock 2 (b) Consider T... 1 answer ##### In 2003 for$12,509 when we in exponent of this machine is 0.5 and the cost...
In 2003 for $12,509 when we in exponent of this machine is 0.5 and the cost indeva 16. The approximate cost of a 500-lup motor in 2008 is closest to$17.678 b. S15,604 c. $27,705 d.$20,306 1. The approximate cost of the 500-hp motor in 2019 is closest to a $27,706 b.$25,055 c. $24,120 d$23,270 An...